OSHA Rebar Cap

Technical Product Data Sheet

To save product sheet choose
"Save as PDF" option as printer destination.


  1. OCM OSHA Rebar Caps are to be inspected before each use for damage. Damaged units should not be used.
  2. There should be no damage to the cap or the fins that contact the exposed rebar ends. If damage such as general cracking or damaged fins is observed please discard the cap. If the fins inside are damaged it will cause the cap to not fit tightly on the end of the protruding rebar and therefore will affect the ability of this cap to function properly. This could cause serious injury or impalement if a damaged cap is used.
  3. Place the OCM OSHA Rebar Cap firmly on to the end of the protruding rebar.
  4. Push firmly until the OCM OSHA Rebar Cap's internal metal insert comes into contact with the end of the protruding rebar.
  5. OCM OSHA Rebar Cap must be centered vertically on protruding rebar end in order to secure a tight fit.
  6. Please check that the cap is secured properly on the rebar such that the top surface of the cap is set in a perpendicular manner to the vertical exposed rebar end.


  • Safety Orange Color made from engineered high impact plastic.
  • 4” X 4” Square Design with internal metal insert.
  • REBARCAP-38OSHA fits rebar sizes #3 - #8.
  • Packed in boxes of 100 pcs per box.
  • Please see our Installation/Specification Sheet.
OCM Part No. Size Carton Qty Weight per pcs lbs
REBARCAP-38OSHA #3 - #8 100 0.50
REBARCAP-912OSHA #9 - #12 100 0.50

Click Here for Installation Guide

OCM Limited Warranty

All recommendations, statements and technical data contained herein are based on tests we believe to be reliable and correct; however, accuracy and completeness of said tests are not guaranteed and are not provided as an express or implied warranty. User shall rely on his or her own information and tests to determine suitability of the product for the intended use and user assumes all risk and liability resulting from his or her use of the product. In the event that a product supplied by OCM, Inc. proves to not meet the OCM, Inc. published dimensional or other specifications of the product, an OCM, Inc. representative will review such product and circumstances to determine whether a replacement is warranted. OCM, Inc.'s and its manufacturer's sole responsibility shall be to replace, at OCM, Inc.'s sole discretion that product or portion of the product which OCM, Inc. deems to be defective, within six months of the delivery of the product. OCM, Inc. disclaims all other warranties or conditions, whether express or implied, including an implied warranties of merchantability or fitness for any particular purpose. In no event shall OCM, Inc. or its parent or affiliated companies be liable for delay caused by defects, for loss of use, or for any indirect, incidental, special, or consequential damages or for any charges or expenses of any nature whatsoever. In no event shall OCM, Inc.'s liability exceed the purchase price paid for the particular affect OCM, Inc. products.

OCM, Inc.

1120 E. Peterson Road, Grayslake, IL 60030
Toll Free: 866-457-5710 • Phone: 847-462-4258 • FAX: 847-462-4259
Please do not place orders with this email address, it is for informational purposes only.