OCM BH60 Type 4A (S) Heavy Ty-Back Hanger are used to support bridge deck exterior formwork. Ty-Back Hangers are specially designed to react to lateral forces prevalent in many overhang forming conditions. This hanger is fabricated with a 1/2" diameter 45 degree Ty-Back End Clip welded to one end of the strut and a 1/2" diameter 90 degree End Clip welded to the other end. Also available in a 3/4" system fabricated with ends to accommodate 3/4" diameter rod, for higher loads. The BH60-4AS has an additional 1/2" diameter 90 degree End Clip which allows a vertical tie for improved overhang stability. Safe Working Load of the supplemental end is 750 lbs.
|OCM Part No.||Diameter||Safe Working Load lbs|
OCM Limited Warranty
All recommendations, statements and technical data contained herein are based on tests we believe to be reliable and correct; however, accuracy and completeness of said tests are not guaranteed and are not provided as an express or implied warranty. User shall rely on his or her own information and tests to determine suitability of the product for the intended use and user assumes all risk and liability resulting from his or her use of the product. In the event that a product supplied by OCM, Inc. proves to not meet the OCM, Inc. published dimensional or other specifications of the product, an OCM, Inc. representative will review such product and circumstances to determine whether a replacement is warranted. OCM, Inc.'s and its manufacturer's sole responsibility shall be to replace, at OCM, Inc.'s sole discretion that product or portion of the product which OCM, Inc. deems to be defective, within six months of the delivery of the product. OCM, Inc. disclaims all other warranties or conditions, whether express or implied, including an implied warranties of merchantability or fitness for any particular purpose. In no event shall OCM, Inc. or its parent or affiliated companies be liable for delay caused by defects, for loss of use, or for any indirect, incidental, special, or consequential damages or for any charges or expenses of any nature whatsoever. In no event shall OCM, Inc.'s liability exceed the purchase price paid for the particular affect OCM, Inc. products.