OCM Logo

Coil Tie - Weld On

Technical Product Data Sheet


OCM Weld On Coil Ties are manufactured with 2 wire struts with a coil welded on one end only leaving the open end available for field welding. Available in 1/2", 3/4" and 1" diameters.


  • Made to Order to accommodate most conditions
  • They may be used with most forming systems for one sided or blind side forming applications.
Product OCM Part No. Wire Size Min. Weld Length Carton Qty Safe Working Load lbs
1/2" Coil Tie - Weld On CT50__WELD - FULL .306 1" Min Weld Length 100 6,750 lbs.
3/4" Coil Tie - Weld On CT75__WELD - FULL .375 1-1/2" Min Weld Length 100 9,000 lbs.
1" Coil Tie - Weld On CT100__WELD-FULL .440 2" Min Weld Length 100 15,000 lbs.
Comments: Actual Safe Working Load will be dependent on quality of field welding. Rebar diameter may influence Weld-On Coil Tie performance.

OCM Limited Warranty

All recommendations, statements and technical data contained herein are based on tests we believe to be reliable and correct; however, accuracy and completeness of said tests are not guaranteed and are not provided as an express or implied warranty. User shall rely on his or her own information and tests to determine suitability of the product for the intended use and user assumes all risk and liability resulting from his or her use of the product. In the event that a product supplied by OCM, Inc. proves to not meet the OCM, Inc. published dimensional or other specifications of the product, an OCM, Inc. representative will review such product and circumstances to determine whether a replacement is warranted. OCM, Inc.'s and its manufacturer's sole responsibility shall be to replace, at OCM, Inc.'s sole discretion that product or portion of the product which OCM, Inc. deems to be defective, within six months of the delivery of the product. OCM, Inc. disclaims all other warranties or conditions, whether express or implied, including an implied warranties of merchantability or fitness for any particular purpose. In no event shall OCM, Inc. or its parent or affiliated companies be liable for delay caused by defects, for loss of use, or for any indirect, incidental, special, or consequential damages or for any charges or expenses of any nature whatsoever. In no event shall OCM, Inc.'s liability exceed the purchase price paid for the particular affect OCM, Inc. products.

OCM, Inc.

1120 E. Peterson Road, Grayslake, IL 60030
Toll Free: 866-457-5710 • Phone: 847-462-4258 • FAX: 847-462-4259
Please do not place orders with this email address, it is for informational purposes only.