OCM Logo

BH-HTBH-HKA
BH-HTBH-HKA-75


Technical Product Data Sheet

 

Description
Ty-Back Ty-Down Hanger HTBH-HK is manufactured with a 1/2" diameter 90 end clip welded to one end of the hanger's strut. The other end of the strut has a reinforced, 180 wraparound configuration. The wraparound end is fabricated to slip over the flange of a steel bridge beam. This hanger is also available in a 3/4" system fabricated with ends to accommodate 3/4" rods, for higher loads.

Features

  • Made from high strength steel.
  • Designed to easily fit around strut.
OCM Part No. Diameter Safe Working Load lbs
BH-HTBH-HK 1/2" 6,000
BH-HTBH-HK-75 3/4" 10,000
Comments: SWL provides a safety factor of approximately 2 to 1. Please specify flange width and finish (PLAIN or HDG) when ordering.

OCM Limited Warranty

All recommendations, statements and technical data contained herein are based on tests we believe to be reliable and correct; however, accuracy and completeness of said tests are not guaranteed and are not provided as an express or implied warranty. User shall rely on his or her own information and tests to determine suitability of the product for the intended use and user assumes all risk and liability resulting from his or her use of the product. In the event that a product supplied by OCM, Inc. proves to not meet the OCM, Inc. published dimensional or other specifications of the product, an OCM, Inc. representative will review such product and circumstances to determine whether a replacement is warranted. OCM, Inc.'s and its manufacturer's sole responsibility shall be to replace, at OCM, Inc.'s sole discretion that product or portion of the product which OCM, Inc. deems to be defective, within six months of the delivery of the product. OCM, Inc. disclaims all other warranties or conditions, whether express or implied, including an implied warranties of merchantability or fitness for any particular purpose. In no event shall OCM, Inc. or its parent or affiliated companies be liable for delay caused by defects, for loss of use, or for any indirect, incidental, special, or consequential damages or for any charges or expenses of any nature whatsoever. In no event shall OCM, Inc.'s liability exceed the purchase price paid for the particular affect OCM, Inc. products.

OCM, Inc.

1120 E. Peterson Road, Grayslake, IL 60030
Toll Free: 866-457-5710 • Phone: 847-462-4258 • FAX: 847-462-4259
sales@ocm-inc.com
Please do not place orders with this email address, it is for informational purposes only.