OCM Logo

BH24 90 Degree Precast Half Hanger


Technical Product Data Sheet

 

Description
OCM BH24 90 degree Precast Half Hangers are provided in 4 different types and load capacities. They are designed to be cast into the top of a Precast/Prestressed Bridge Beam or Girder and subsequently supports the fascia overhang formwork. These hangers are installed by the precaster during beam or girder production at predetermined locations typically provided by the bridge contractor. The precaster must ensure that they are installed with 1/8" clearance between the edge of the beam and the Coil Bolt, and also so the End Clip will bear on the top surface of the beam. Failure to do so can result in reduction of the hangers Safe Working Load.

Features

  • SWL provides a Safety Factor of approximately 2:1
  • Please specify quantity, type and finish (Plain or HDG) when ordering
  • WARNING: Concrete should be a minimum of 5,000 PSI and have a minimum Flang Thickness of 5"
OCM Part No. Diameter End Clip Angle Safe Working Load lbs
BH24-1PR 1/2" 90 3000
BH24-3PR 1/2" 90 2,000
BH24-4PR 1/2" 90 6,000
BH24-8PR 1/2" 15 6,000
Comments:

OCM Limited Warranty

All recommendations, statements and technical data contained herein are based on tests we believe to be reliable and correct; however, accuracy and completeness of said tests are not guaranteed and are not provided as an express or implied warranty. User shall rely on his or her own information and tests to determine suitability of the product for the intended use and user assumes all risk and liability resulting from his or her use of the product. In the event that a product supplied by OCM, Inc. proves to not meet the OCM, Inc. published dimensional or other specifications of the product, an OCM, Inc. representative will review such product and circumstances to determine whether a replacement is warranted. OCM, Inc.'s and its manufacturer's sole responsibility shall be to replace, at OCM, Inc.'s sole discretion that product or portion of the product which OCM, Inc. deems to be defective, within six months of the delivery of the product. OCM, Inc. disclaims all other warranties or conditions, whether express or implied, including an implied warranties of merchantability or fitness for any particular purpose. In no event shall OCM, Inc. or its parent or affiliated companies be liable for delay caused by defects, for loss of use, or for any indirect, incidental, special, or consequential damages or for any charges or expenses of any nature whatsoever. In no event shall OCM, Inc.'s liability exceed the purchase price paid for the particular affect OCM, Inc. products.

OCM, Inc.

1120 E. Peterson Road, Grayslake, IL 60030
Toll Free: 866-457-5710 • Phone: 847-462-4258 • FAX: 847-462-4259
sales@ocm-inc.com
Please do not place orders with this email address, it is for informational purposes only.